Dash Cam 1080P Full HD Mini Car Dashboard Camera with Night Vision,G-sensor Motion Detection Loop Recording Parking Monitor

LCD : 1.5 inch LTPS
Screen Lens: 120degree A+ grade High
Lens Manual Lock : Emergency recording support
Night Vision: Support(1 IR LED)
Video Resolution: 1920*1080(1080FHD) 25fps 1440*1080(1080P) 1280*720(720P) 640*480(VGA) 320*240(QVGA)
Video format : AVI
Photo Resolution: 12M/10M/8M/5M/3M/2MHD/VGA/1.3M
Photo format: JPEG
External Memory: Micro SD card up to 32GB
Interface: Support USB
Battery: Built-in 200mAH TV Mode:PAL & NTSC
Loop recording: Off, 1 mins, 2 mins, 3 mins

Package included:
1 x 1.5″ LTPS Dash Cam
1 x Car Charger
1 x Adjustable mount
1 x USB cable
1 x User manual

1.Battery is mainly used to save files in emergency. Please always connect Dash Cam to external power while it is in use.
2.Be sure to format your SD card with your Dash Cam for optimal use. Failing to format SD card may result in card error.
3.The performance of a memory card deteriorates after certain time of service. It affects the quality of images it stores. In case it happens, please format the memory card, or replace it with a new card.
Wide Angle & Night Vision: Presents 120 degree field of road view. Built in IR light, combined with external lights, produce outstanding night video quality. The quality of the night driving video is just like recording in the daytime.
G-Sensor: Enabled Recording Occurs as soon as Any Sudden Braking, Impact , Rapid Acceleration or Sharp Cornering Occurs. The dash camera also supports SOS emergency recording,motion detection, looping recording.
Loop Recording: Loop record enables it to overwrite the oldest video with the newest, Allowing for fully automatic and continuous recording (the protected video file will not be overwritten). Supports Micro SD card up to 32GB.(Not included).
Unobtrusive & Small Size: Very compact design , hiding behind your mirror, so doesn’t take up much space or cause obstruction when driving.
Motion Detection: With motion detection is enabled, when the DASH CAM detects the movement of the object, the camera starts recording, and the camera enters the motion detection standby state after the motion detection is finished. When the object is detected again, the camera function would start again. The recorded videos are saved and locked automatically, which never be covered by cycle video.

Leave a Reply

Your email address will not be published. Required fields are marked *